Evening all!
Quick update, everything is set up. The ballast is set to 400w and on. The exhaust fan is set on the low,390 setting. I've set the fan speed controller to 25 degrees. I've set minimum speed on the exhaust at 30% and 10% for the intake. I've put the probes from everything on a bucket in the middle with a standard thermometer. Along with my vivarium hygrometer, so I can see temps and humidity without opening the doors. There's also a small 7" oscillating fan in there. (There will be more).
I've locked it up and I'm gonna leave it half hour or so. Then I'll check see what's happening. See if all my temp readers agree with the fan controller.
I think if all goes well, I'll switch my fan to high,790 speed when I switch my light to 600w super lumen. 😆(during late flowering)
I'll post another update later with pics and results. If the bulb cools quick enough, I'm gonna put the cfl in and check that ready for vegging.
sent from Thames Ironworks
Bookmarks