If you do get some kind of guidance how to use the bloody thing post up a guide here. The amount of threads I have found where no one knows how, would indicate that there is a need for a guide.
If you do get some kind of guidance how to use the bloody thing post up a guide here. The amount of threads I have found where no one knows how, would indicate that there is a need for a guide.
Dandy1990 (24-08-16), Dutchcourage (24-08-16)
Shamelessly lifted from another forum....
Dunno if that helps?Easiest way is to press the left button (set) first to pick the setting required ; 18/6 12/12 or 24/0 then press the right hand button to start the ballast....however as you have probably found, this means you can only do this at the time you wish the timer to be set for as it has no realtime clock!
You can set the delay before it starts however....
It's Not What You Know, It's What You Can Prove
Dandy1990 (24-08-16), Dutchcourage (24-08-16)
Nice one M.C, like your style :-)Originally Posted by M_C
M_C (24-08-16)
Thanks buddy il give that a go and hopefully it works this time��
Peace
Dandy✌️
Dutchcourage (24-08-16), M_C (24-08-16)
Scrap the timer if you can mate jus get a plug in one and set the ballast to always on if possible.
With no realtime time reading it is virtually impossible to tell how accurate the timer is. If my plug in timer is slipping on time at least I can look at it and tell it is.
Sent from my GT-I9505 using Tapatalk
Dutchcourage (25-08-16), M_C (25-08-16), Smiffy (25-08-16)
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Reply With Quote
Bookmarks