Thanks Miss,
Mines runs i'd say 20% faster on 15v and will only run one way on 15v
Was just a wee bit worried about it burning out but all seems fine.
it's only until i get a longer 12v adapter anyhow.
Thanks Miss,
Mines runs i'd say 20% faster on 15v and will only run one way on 15v
Was just a wee bit worried about it burning out but all seems fine.
it's only until i get a longer 12v adapter anyhow.
Last edited by canine; 13-11-12 at 01:04 AM.
Every dog will have his day.
GEORGE (10-03-20)
Awesome job!
GEORGE (10-03-20)
the more components your running the more volts you need, if you have 2 12v fans then you need 24v to run them at full whack in a series circuit as it loses volts at each component it passes through, if you put them in a parallel circuit then 12v would get you 12v on each fan but you would need more amps as it loses half it's amps instead at each component.
But increasing amps is far more dangerous than increasing voltage. Current kills, as my college teacher kept saying.
So i dont think you'll be seeing any overheats for a while unless your amps are high in which case it would've probably already happened or you'd have at least smelt it melting a bit
Last edited by givitup; 02-08-13 at 11:16 AM.
“Know Thyself! And thou shalt know the Universe, and all the Gods!”
Current - Naranja Diesel and Royal Dwarf - 250w LED Hydro
Woods Old Navy Rum, Purely Medicinal - My Father
GEORGE (10-03-20)
Thanks For This Guide
Last edited by old skool smoker; 27-02-14 at 08:42 PM.
GEORGE (10-03-20)
Yep, thanks for the guide. I have wired two fans into a terminal connector. I've got the +ve/-ve from both fans going into the same pins on the connector and then +ve/-ve from the power plug into the other side. Is this parallel or series?! It works just fine but as I've just read, I've probably dropped the voltage to each fan doing it this way as the adapter is 12v.
Too weird to live, too rare to die
GEORGE (10-03-20)
Hi there,
Im totally new to this. Pre first grow building my first space bucket.
The bit with the Molex's has me confused.
The first photo under STEP 2 shows a red and green cable going into Molex 1
The second photo under STEP 2 looks like you put the black charger cables into Molex 1 on the opposite sides.
However in the third photo under STEP 2 looks like you didn't plug the charger into Molex 1 at all and instead plugged it into Molex 2 what Molex 1 plugs into.
Can anyone shed any light on this please.
Lastly, thanks very much for this guide. Very helpful
GEORGE (10-03-20)
ahhhhhhh hang on. Are you basically jamming one into the other by fitting Molex 1 and 2 together. So all as Molex 2 actually does is secures Molex 1's connections from the PSU?
GEORGE (10-03-20)
exactly what i was looking for nice thread man
GEORGE (10-03-20)
Wow its nice great quality fan power.
GEORGE (10-03-20)
GEORGE (10-03-20)
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks