Lights on - Low humidty - New grower :-)

**the green rooms** · 25-05-17, 08:42 PM

I'd been planning this for too long and I don't think I ever would of been or felt 100% ready to do it
So I had to just sow the seed :-)

Yeah I might lose these seeds but I have more and I have learnt

**happyjack** · 25-05-17, 08:53 PM

put them in the shaded area outside on hot days

**the green rooms** · 25-05-17, 09:09 PM

So just been up and checked on them after having the fans and lights on for 6 hours and it's not good.

The grow tent was being sucked in, if that makes sense? Have I got my fan/filter outake intake the wrong way round?

Click image for larger version.

Name: _DSC5282.jpg
Views: 20
Size: 60.2 KB
ID: 346192

Click image for larger version.

Name: pots.jpg
Views: 23
Size: 87.4 KB
ID: 346193

**the green rooms** · 25-05-17, 09:11 PM

As you can see from the 2nd picture the temp is still way to high.

Obviously being in the loft is not ideal. There is a window up there which has been kept open

**M_C** · 25-05-17, 09:17 PM

What is the temp in the loft itself?

**the green rooms** · 25-05-17, 09:21 PM

i think it was 28 before i turned the lights and fans on, this was about 2pm.

**M_C** · 25-05-17, 10:19 PM

Originally Posted by the green rooms

i think it was 28 before i turned the lights and fans on, this was about 2pm.

Always be aware that you will never get your temps below the ambient temp of the air going into the room

**the green rooms** · 25-05-17, 10:31 PM

Yeah that's fine, it was hot today and that was temperature at the hottest part of the day.

Only a few days ago temp ranged from 20-24

Obviously I have an issue as it's gonna be quite warm for a few months now

So I have to figure out ways to make it a lot cooler!

Does anyone know what's going on with my tent being sucked inwards after having the fan and filter on?

**ggotch** · 25-05-17, 10:59 PM

thats called negative pressure,which is good,that way everything in your tent airwise,smell etc is being pulled through your filter and not leaking out through zips etc.

you can turn fan down so that you find a minimum setting where you still have that neg pressure and then you still have fan speed adjustment upwards to balance out temps and rh etc etc when needed.