amiherealready (15-09-17), Ben.g (28-05-18)
@ironman
what sort m8?
I've read about making one with acoustic board inside a box oversized to allow air to move round inside .
or are you on about something like eBay,: 192259744910
Last edited by amiherealready; 15-09-17 at 09:07 PM.
amiherealready (15-09-17), Ben.g (28-05-18)
@ironman
im gonna order 2 , one for next to carbon filter 8" because i ordered an oversized 8" filter with 8 to 6 reducer and 1 at 6" for other side of fan after fan silencing box.
hopefully this will quet thing right down.
the shop i bought from only had 10mtrs of 6" acoustic in stock , albeit i wanted 5mtrs so the gave me 10mtrs at same price, so I'm gonna thinking of venting now vent into the coldest area ???
, the end room at garage door area and intake from middle now , this will allow me to utilise the extra sound deadening noise of length and silencers??
any thoughts???????
Ben.g (28-05-18)
ecotechnics controllers are great, I loved mine. don't know about 10Amp connectors, I just wired my fans etc into the controller. if you use an electric heater, I think it cant be over 2kw
you could always use an oil filled radiator with a thermostat instead.
one, say,8 inch circulation fan would be plenty for that size of tent.
sound idea with boxing in the fan, will keep the noise down.
only change I would make is to vent the exhaust outside the garage, to prevent condensation build up.
amiherealready (16-09-17), Ben.g (28-05-18)
the garage has corrugated type roofing so heat should leave without causing condensation hopefully.
i intend on putting a small oscillating fan diffusing the warm air at the end of the run which is only a few metres long
ill also have a look now locally for 8" circulation fan.
thanks for the help
5 out of 6 have come through in last 12hrs
All dinafem industrial plant auto cbd come through jesus they are 3" tall in that time
just waiting on 1 of the sweet seeds sweet nurse auto cbd . the big one is also 3" tall tbh
looks like my av rack is perfect to start them in at 23/24 degrees with 40% humidity.
They are in 0.5ltr pots biobizz light mix with 30% perlite added and watered in with shogun katana roots , soaked them for 24/36 hours in plain tapwater then planted them regardless of taproot or not ( i had a couple)
all in the rack inside a propagation unit with cup of water inside it and bowl outside it, lid is 1/2 open
bring on the meds
Ben.g (28-05-18)
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks