Originally Posted by
bigbadbillybob
That would have been me,Maybe?
I posted a few pics of a couple of systems I used to have, before they were stolen by the cunt-stables.
If you are just using one flowering pot, then I presume its to use a chiller to keep water temps at 19, yeah.
Otherwise there isn't much point to be honest.
The recirculation factor doesn't have a huge effect on yield, I used to get just as much with simple bubblers. to be honest, BUT- you do need decent size totes
The advantage of the rdwc is emptying and filling the system, its much less back ache, if you have a few pots.
If you want to make one, and do it properly, without leaks, get the following items and I will guide you through it
2 No. 64 or 84 litre really useful box (2 of these fit in a 1.2 tent and will have the sides of the tent bulging with weeed)
2No. 200mm net pots
4 No 40mm solvent weld tank connectors
4 No 90 degree elbows, 40mm -solvent weld
About 3 metes of 40mm pipe to suit
If you want to run spray bars;
about 3 metres of 22mm overflow pipe -solvent weld
4No. 90 degree elbows 22mm solvent weld
1 No. tee fitting 22mm solvent weld
some solvent cement
A hole saw for cutting holes to suit 22mm and 40mm.
When you have this sorted, give me a shout, via pm if you like
Bookmarks