Any tips and tricks on the ecotechnics

**Swifty89** · 02-08-17, 12:04 PM

Originally Posted by joker_the_smoker

i dont use one tbh, aint since i bought it

no harm in using it though lad

Mate they have the 3 pin wire connectors but only 10 amp ?? Are they ok?

Sent from my iPhone using Tapatalk

**joker_the_smoker** · 02-08-17, 12:16 PM

Originally Posted by Swifty89

Mate they have the 3 pin wire connectors but only 10 amp ?? Are they ok?

Sent from my iPhone using Tapatalk

Yea mate wil cool

JB · 02-08-17, 12:21 PM

Joker, any idea if I can run one of these off it come winter if necessary?

Has it's own thermostat built in but can't work out how to use it. Feel this sort of thing would be safer in my small tent then a fan heater.

JB · 02-08-17, 12:23 PM

Originally Posted by Swifty89

Mate they have the 3 pin wire connectors but only 10 amp ?? Are they ok?

Sent from my iPhone using Tapatalk

Hope you won't be pulling anything like 10amp through them.

watt/240v = amp (if I remember correctly)

i.e. 1000w bulb is 4.16 amp.

**joker_the_smoker** · 02-08-17, 12:26 PM

Naa jb laaa waste time imho. Fan heater better mate

I have one them and they do fuk all for temps yano bro.

**joker_the_smoker** · 02-08-17, 12:27 PM

Originally Posted by JB

Hope you won't be pulling anything like 10amp through them.

watt/240v = amp (if I remember correctly)

i.e. 1000w bulb is 4.16 amp.

Lights have nothin to do with controller though so dont mater

**Swifty89** · 02-08-17, 01:38 PM

Originally Posted by joker_the_smoker

Lights have nothin to do with controller though so dont mater

Joker will I have to connect the earth wire for my intake fan? It's only 4inch and says it doesn't need it just wanted your expert opinion bro

Sent from my iPhone using Tapatalk

**joker_the_smoker** · 02-08-17, 01:40 PM

Originally Posted by Swifty89

Joker will I have to connect the earth wire for my intake fan? It's only 4inch and says it doesn't need it just wanted your expert opinion bro

Sent from my iPhone using Tapatalk

If theres not one on the fan then no need wire it on controller. I jus clip the earth short.
Think its wen you get to 5inch rvk L1 they have earth or 6inch one them lol

**Swifty89** · 02-08-17, 01:54 PM

Originally Posted by joker_the_smoker

If theres not one on the fan then no need wire it on controller. I jus clip the earth short.
Think its wen you get to 5inch rvk L1 they have earth or 6inch one them lol

Perfect mate I better get cracking then I suppose....cheers for you help bro

Sent from my iPhone using Tapatalk

JB · 02-08-17, 02:01 PM

Originally Posted by joker_the_smoker

Lights have nothin to do with controller though so dont mater

You what lad? Ha the light thing was an example.

The physics don't change if it's a fan or a light or a heater but a 2kw heater is going to be 8.3 amp in that case.

P.s. Re the RCD, any half new breaker board would already have one fitted.

Thread: Any tips and tricks on the ecotechnics

Thread Tools

Search Thread

Display

The Following 2 Users Say Thank You to Swifty89 For This Useful Post:

The Following 2 Users Say Thank You to joker_the_smoker For This Useful Post:

The Following 2 Users Say Thank You to JB For This Useful Post:

The Following 3 Users Say Thank You to JB For This Useful Post:

The Following 3 Users Say Thank You to joker_the_smoker For This Useful Post:

The Following 2 Users Say Thank You to joker_the_smoker For This Useful Post:

The Following 2 Users Say Thank You to Swifty89 For This Useful Post:

The Following 2 Users Say Thank You to joker_the_smoker For This Useful Post:

The Following User Says Thank You to Swifty89 For This Useful Post:

The Following 2 Users Say Thank You to JB For This Useful Post:

Bookmarks

Bookmarks

Posting Permissions