Hopper, see revised drawing - wasn't 100% sure about Tee'ing the feed lines as you recommended, let me know if that's wrong. I will defo look over the links you posted after work, peace!
Hopper, see revised drawing - wasn't 100% sure about Tee'ing the feed lines as you recommended, let me know if that's wrong. I will defo look over the links you posted after work, peace!
Yeah 2 returns mate, not direct from each tub, just have 2 from each one alongsame piepework like mine and then 2 main back to res
If you're in the U.K. Look up the "really useful tubs" sizes and decide from there what you can fit in the space, I know they do 34 and 64 ish litre ones but check dimensions
4000-4500 will be fine and not too noisy for them Sizes matey
I'll try do a quick sketch of your tubs in that position and how I'd do the pipework
Also do the tubs and res have to be in that exact position in your space?
Seems an odd way to have things!?
Hopper - just looked at your thread, nice setup! I've recently done away with my tents and now have a full room to play around with, so not really limited with tub sizes. It's super convenient that your are doing 3 tubs as well, I will defo learn a lot from your thread and don't need worry about the info only applying to a huge 12 plant setup or whatever. I'm in Scotland mate so will look that up and get me some big ol tubs ..... Just noticed in revised sketch that the feeder lines are no different to the first time just at different angles hahaha my bad. If the pump is connected directly to a big reservoir, is there any header pressures or the like that I'd need to consider? Gets a bit out my depth when tryna figure this bit out lol
Sketch below mate, basically feed spray bars tee off to give a more even pressure, and returns have a pipe either side of each tub, and more importantly each side then goes back to the res, minimal chance of bloackages then, my system isn't that powerful using the 4500, using 84ltrtubs I'd have 6000-8000
4500 would be good for 64ltr tubs I imagine
bigbadbillybob (17-08-17)
Sweet thanks for sketching that out, that clears up a lot. I never thought to use spray bars tbh, I was just going to have a single inlet. Do your spray bars force the pump to work harder? Or are the holes big enough to allow free flow at any rate? How often are you needing to fill up the res during flower? I've had to fill up my 25L buckets daily during flower in the past which is not ideal, big monster plants drink so much its crazy. Hoping to cut that time down some
If you look at jesses build thread you'll see the spray bars in action in the video he put in there , I think the pics have disappeared but vid should still be there, just 2 or 3mm holes drilled around the 22mm solvent pipe bars, pump is fine and gives nice amount of oxygen to the water then
Mine are drinking about 20/30 litres a day now, but across the 4 pots which total 220/230 litres its no biggy, wouldn't like to risk how much they go down in a dwc!
I will check that video out mate! That's cool, using around 10% of your total each day, much better than how I'm operating atm. Its the fact that water/nute ratio will be waaay more stable and temperature too. Can't wait to get the system up n running and see what results it delivers! Every other vid I've seen the plants look epic! Do you have any flood protection measures in place? Can't imagine what damage would be done if 200 litres flooded my room, touch wood!!
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks