Hash bags for bubble hash ice hash

[GEORGE]

Could you elaborate a little mate? What kind of screen? steel like a grid?

Thanks Hotshot

Just go over to Ebay guys, and look for 75Micrion to 150 Micron stainless steel screen. Comes in 12" square 12"x12" Staple between square board, and you have a great dry hash maker. I usually just use the 150 Micron screen, make some lovely Keith for hash making later, but can do the smaller Micron, if you want to leave out some of the CBD and CBN and stuff.

[GEORGE]

75 micron and 120 micron using bubble bags.just buy a set of 3 bags easy as shit bro


Sent from my iPhone using Tapatalk

Bags are fine BB, use them for years, but the screens give you a little better quality, and never any plastic.

[BB]

Bags are fine BB, use them for years, but the screens give you a little better quality, and never any plastic.

Think I'll get some and try that way.nice one brother.


Sent from my iPhone using Tapatalk

[SmobyToker#1]

Ok thanks hotshot and Bb Im feeling very confiedent now, so either a set of 3 bags or a screen or both lol. would be nice to see the differences. Something is telling me the dry hash will be more up my street. Hotshot one last thing buddy. When its all gone through the screen and scrape together into a lump, do you still heat / carboxylate the lump with heat? turning all the non psychos to psycho's lol.

Thanks guys.

[GEORGE]

Ok thanks hotshot and Bb Im feeling very confiedent now, so either a set of 3 bags or a screen or both lol. would be nice to see the differences. Something is telling me the dry hash will be more up my street. Hotshot one last thing buddy. When its all gone through the screen and scrape together into a lump, do you still heat / carboxylate the lump with heat? turning all the non psychos to psycho's lol.

Thanks guys.

I have two small boxes, I made for pressing them together with. If I do Dry screen hash, I can go ahead and press and leave for a few hours before taking them out the box. If I use dry ice, then I wait a 24 hour period before putting in the boxes and pressing. After they come out the boxes, I wrap them up in wax paper, then some wrap, and then some tinfoil, and wet them down with water, and put in oven for about 10 minutes on about 200 to 250 heat, and take them out and roll them out with a rolling pin, and some times I repeat the oven process, and do it again, and it comes out pretty well.
The plant I brought in from out doors in about it's third week, just thought I would show her off. lol

[GEORGE]

There is a much easer way to press keith. Buy your self a Clay extruter, they make nice round tubs and can be put in the oven for just a couple of minutes, before tighten them down for a better press. If you use the box type press, wrap the wax paper, in regular 8x10 paper, and tape together good, and wet it down under the fauset real good before putting in the oven, then roll it out real good.

[happyjack]

bubblehash no bags.
large bucket to mix trim ice and water, use a flower sieve to separate water from trim into a bowl on a tilt, take away the water hash is bottom of bowl.

[scrogster]

Dry ice hash 25micron bag kushy kush

Sent from my SM-G360P using Tapatalk

[GEORGE]

Could you elaborate a little mate? What kind of screen? steel like a grid?

Thanks Hotshot

Here is a picture of a 150 Micron stainless Steel I just frame up. 12"X12". Some nice Keith you have there Scrogster.

[Karsa]

Dry ice hash 25micron bag kushy kush

Sent from my SM-G360P using Tapatalk

This is what I want for my occasional cuts and popcorn spots

Still no idea what to do with trimmings from defoilation either... Can you do anything with that?

Sent from my G8141 using Tapatalk