Hi guys I’m a noobie.
Am I going to have a problem running my EC 6” China Hyper fan 700m3, big carboair filter.
As it’s running now I hv filter in my tent with 6” ducting running 7 feet away to my fan outside the tent,
I then have a reducer from 6” to 4” coming out of tent and going into 4” ducting this size been only size I can fit into
My chimney. So this the length of 4” ducting is 10 feet then into my chimney and 20 feet chimney to travel through,
Will this be the problem to my humidity/temp problems.
Have to state it’s in a garage at th back with a fauls wall sealed tight cold air been dragged in from front end of my garage which there is a lot of due to my garage door been crap and hole in the roof.
I hv a BHC controller cost me £280 on hot days cannot keep temps down 30 degree even with fan running 100% to keep temps down, humidity at this time is like 56% on a really hot day. On a night the temp too low but humidity too high what am I doing wrong need to mention I only hv a 600watt HPs light with a foil reflector.
Thanks so much any help would be awsome.
Bookmarks