CityDweller (12-10-18), gardro (07-09-18), GEORGE (07-09-18), HisHighness (09-09-18)
Yeh man, biggest cost is the stepper motors. All in a few hundred would cover an 8 channel example for all the parts.
That should be enough for:
Liquid silicon,
Ph down,
Grow,
Bloom,
Micro,
2x different Flower boosters
I'm in the middle of designing a load of parts, ducts, valves, brackets etc. Progress has been slow!
Sent from my SM-G960F using Tapatalk
British green (09-09-18), CityDweller (12-10-18), Done420 (09-09-18), gardro (09-09-18), Gaz (09-09-18), GEORGE (09-09-18)
Some pics of the 3d work I've been doing.
Case for the led drivers, and prototype of the ducting valve. Two of these will allow a recirculating system or normal intake -> exhaust.
The bottom section housing all the mechanics and power will have a good deal of heat, which can be used to warm the air above if needed.
Having it recirculating will also make it much more efficient to cool and maintain humidity...
Sent from my SM-G960F using Tapatalk
Still designing ducting, but hooked up some code to the flap controller
giggidy.
Sent from my SM-G960F using Tapatalk
British green (15-09-18), CityDweller (12-10-18), Done420 (13-09-18), gardro (13-09-18), GasMan (12-12-18), GEORGE (14-09-18), Herbitual (25-10-18), WhIpLaSh (13-09-18)
Looking at the layout of some of the LEDs... 3000k and 4000k and the far red LEDs...
Where would you put them?
I got 2 50w full spectrum cobs on the way too.. thinking they can go between the far red in the centre...
Sent from my SM-G960F using Tapatalk
CityDweller (12-10-18), gardro (14-09-18), GEORGE (14-09-18)
I've done some stuff honest! it doesnt feel like much progress has been made, but this CAD stuff has taken more time than I'd like to admit!
I've been designing alot of the enclosures for the electronics, specced up cables and connectors and started to build into the cupboard.
Spent alot of time playing with the air conditioning system, now that works I fitted the heat exchanger (the black square vent in the bottom of the grow chamber) and all the piping and valves for the flood drain/bubbler hybrid system.
I'm concentrating on the air system right now, the ducting will be pretty much custom so that it is software controlled and is sealed from the external environment. Once its test fit in some of the key areas it should go together quite quick and at least have the air system working - recycling at least!
Sent from my SM-G960F using Tapatalk
British green (20-09-18), CityDweller (20-09-18), Done420 (20-09-18), GEORGE (20-09-18), scoobywho (20-09-18), WhIpLaSh (19-09-18)
Why couldn't I be a stoner genius eh? Spend more time pondering the mysteries of what was the first guy who milked a cow really thinking 😣.
This is looking top notch mate bet your smoke will taste even sweeter knowing you built its house from the ground up lol.
Sent from my SM-G920F using Tapatalk
CityDweller (20-09-18), Gaz (20-09-18), GEORGE (21-09-18), HisHighness (20-09-18)
Sour Livers - mentored by BB
https://www.thctalk.com/cannabis-for...-mentored-grow
Gaz builds the Igloo
https://www.thctalk.com/cannabis-for...ilds-an-igloo-)
GasMan (12-12-18), GEORGE (21-09-18), HisHighness (20-09-18), scoobywho (20-09-18)
Gaz (20-09-18), GEORGE (21-09-18), HisHighness (20-09-18), lipnobody (25-10-18)
Jesus, and wait, why did he drink the result!??
I used to love milk.
I've had the last delivery of LEDs now, so here's the final layout for the light panel.
4x 3000k 10w panel cobs
4x 4000k 10w panel cobs
4x 740nm 3w farred/IR cobs
3x 380nm 3w UVA cobs
2x 400-840 50w 'full spectrum' cobs
I've got four separate powersupplies that can fade these lights but that will be a software thing
Typically cant find any drill bits now..
Sent from my SM-G960F using Tapatalk
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks