Is it knackered already?
I can't get it to calibrate at 2 points, 7 and 4
7 normally stays at 7.0 but the first time you check 4 you get 4.2
If you "calibrate " 4 to 4.0 then 7 goes to 6.8
Not way off but, you know
Is it knackered already?
I can't get it to calibrate at 2 points, 7 and 4
7 normally stays at 7.0 but the first time you check 4 you get 4.2
If you "calibrate " 4 to 4.0 then 7 goes to 6.8
Not way off but, you know
GEORGE (23-10-18)
I’ve only ever calibrated my essentials meter to buffer 7 with no issues
i found my calibrations used to need time allowed to adjust the sensors etc to room temps and calibration liquid temps etc.
"used to" as i havent used them for a year+,i dont need anything measuring like that anymore for soil grows.just temps n rh now.
wavering readings have always been the sensor end being dirty or indeed dying in my gear some have even become cracked over time and hence time for new ones.
or perhaps the batteries needed changing,less than optimal power will make things unreliable n most batteries are now chinesee made so we know their reliability record .
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks