Just setting up for my 1st bash with wilmas keep reading about people loosing plants over a blocked dripper and getting around this by have 2 per pot. I?m after some advice on how people have done the pls peeps
Just setting up for my 1st bash with wilmas keep reading about people loosing plants over a blocked dripper and getting around this by have 2 per pot. I?m after some advice on how people have done the pls peeps
GEORGE (16-12-18)
Mate
I’ve done this before and used and spliter for each output on the top of the unit. It’s works well but you’ll need a good pump to power the extra output or you’ll get it working in one and not the other.
In my two years I’ve never had one block just make sure you leave it a little out the medium then roots will never grow in. To be honest it’s ok whatever you do as long as you keep the res clean and change at least fully once a week.
Be sure the pebbles are clean or this will cause no end of issues with the slit building up. I also add hydrozyme easch change to help break down any bad in there.
Your in for a treat and the speed is amazing
Happy growing
I’ve got two drippers per pot .
I just attached another 4pipe manifold to the existing pipework . It provides 8 nipples in total , 2 each to my 4 pots .
I use a maxi jet 1200 , perfect power for this system
GEORGE (21-12-18)
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks