I am going to write a hempy guide for my own personal use and the use of others if they wish. I no enough but have no real experience in hydro. I have been taking the best note my eyes could find, jotting them down and now turning them into a guide on THC-T.
To make a hempy bucket first you will need anything from a 5 liter to 20 liter bucket, 10 liter being spot on. The bucket you use will need to be of a dark coulor so no light shines through the bucket because light and water are a recipe for algae disaster (I used 3 layers of duck tape on outside of the bucket). Drill a 10mm hole 2 inches up the bucket and attach some sort of gauze so you don't lose the perlite out of the hole. You will then need 3 - 4 parts perlite to 1 part vermiculite and wash all the dust and dirt off using a siv under a tap and fill your hempy bucket with your medium mix. Now you will need to make a plain water feed with a ph of 6.0 to ph the perlite, say your using a 6.5 liter bucket then you water with 5.5 - 6.5 litres of water only for the first time, now you can place your seedling/clone in your bucket. Everyday, every other day from now you will need to water plain 6.0ph water so 30% of what you put in comes back out your drain hole, maybe feeding half strength seedling nutrients once or twice a week, you will need to water every day every other day until the tap root hit the reservoir, there should be a vast increase in growth to let you know this has happened. Once the tap root hits the res you should start watering less frequent, like once or twice a week depending on what your plants telling you, carry on with this upping nutes when needed/when plants ask for them and you should be fine.
Hope this is of some help as it is for me and I will add more/better info as my experience grows.
Peace
Muller
Bookmarks