Originally Posted by
WD40
Place the pump sprinkler in the middle of the propagator and place the correx sheet on top making sure that the sheet does not come into contact with the sprinkler head.Mine did come into contact with the head when I set it up so I had to shorten the plastic sprinkler tube for it to fit.You will need to fill the Res as high as you can get it,I usually fill it up to the half way point on the erect sprinkler tube doing this helps in controlling the PH as the more solution you have the easier it is to manage.Place your net pots into the given correx holes and turn the sprinkler on and look into each net pot making sure that all of them are catching the sprinkler solution when it is in motion.
You can adjust the speed of the sprinkler head with the small dial for either fast or slow action which is a personal preference and I have my sprinkler on 24/7.
Place an air ring or something similar into the propagator and Bob's your Uncle,you are up and running.
Bookmarks