Checklist
Trim - I forgot to weigh mine but I had trim for 1 Auto Roadrunner that I recently harvested, I'd take a guess that I used 10-15g of trim.
A 5 Litre bottle and a bag of ice.
At least 1 more liquid container, preferably something tall and thin.
A turkey baster and a pipette
A sieve
-------------------------------------------------------------------------------------------------------------------
So, I started by filling my 5l bottle up approximately 1/3 full with ice then added 1l of water and my trim.
I put the lid on the bottle and shook for around 15 minutes.
I then tipped the solution into another container through a sieve to catch the ice cubes and trim. I left this to settle for 4-5 hours.
I put mine into a 2 litre bottle with the top cut off first because it was the only thing I could find big enough, I left that to settle for 4 hours then siphoned off most of the water.
I then tipped the remaining resin/water into a flat bottomed glass jar.
I left the to settle for another 4 hours then siphoned off most of the water with a pipette and tipped the last of the resin/water into a narrower bottomed glass.
I left that for another 4 hours then siphoned off as much of the water as possible with a pipette then tipped the remaining resin/water onto some foil and left over night, I put it into my grow tent for a couple of hours when the lights came on in the morning and the water dried straight up.
Leaving me with this
I rolled the resin into a ball and left to dry for a little while longer.
And was left with this
Not much but better than nothing, I haven't smoke it yet but will report back
Cheers for looking, I hope it's of some help to anyone wondering what to do with the trim from 1 plant. Enjoy!
Bookmarks