Parts list for 6 Pot RDWC.

[Fulty]

Looking to build a 6-pot UDWC and in need of sum help on whats missing to finish the system. I have been looking through the threads but cant find a complete list of parts used. Below is where im at,

Currently have/Ordered -

8 - 20l Square Buckets
8 - 14mm Netpots
1- Hailea HX6840
1- Hailea 600l Airpump
8 - 2" Ball Airstones
1 - 8way Manifold
1 - 25mm Stop Valve
1 - 30mm to 25mm Reducer

Stuck on which plumbing parts to buy and what diameter pipe etc

Any help would be spot on.

Details of Room, lights etc to follow

Cheers

[Icon]

Wrams and Budmeister both have threads on building full UCDWCs

I have used 40mm push fit connections.
The flanges are sound as long as you fit them correctly and the buckets have steep flat walls, rounded buckets are no good and angled walls would mean you need to use elbows to achieve accurate angles to avoid leaks.
Im on with building one for someone as we speak
You will need a mandril and 2 hole cutters as well
Have you started a diary thats the best thing to do so people can assist you as you build the system.

[Fulty]

Cheers for reply Icon. I have the same buckets as WRAMS. I'm going to look in B&Q for the plumbing parts. What intake and extract fan would you suggest for a Room built within a room which is:

Width - 2.9m
Length - 2.7m
Height - 2.3m

Room has window for fresh air. Room will have 2x 600W Dimmable Digital HPS.
Do you suggest a Carbon filter which is a must for odour controll!!!!!!

Cheers