This is a common method for making hash, that most people will find easy to follow. I have made the amounts small, so you can see if this method works for you, without using much weed. If you like the method, use larger amounts for a larger yield.
You will need:
quarter ounce of good marijuana buds
glass jar with a cap (12-24 oz)
strainer or some window screen
How to Make Hash- stage 1
Get a quarter ounce of good marijuana buds. Dry them (keep temp below 90 degrees F) and crush them up with a pair of scissors or something similar.
Strain the powder through a strainer or some window screen to remove any stems, seeds, or other non leaf material.
Add the powder to a 12-24 oz, or larger tall clear glass jar with a cap, do not fill the jar with more than 1/4 mj powder.
How to Make Hash- stage 2
Add very cold, or ice water till the jar is nearly (7/8 ths) full. DO NOT USE WARM OR HOT WATER. COLD, OR ICE WATER ONLY !
Put the cap securely on the water - mj mixture and shake for as long as it takes to get the powder mixed into the water, this is harder than it sounds because mj is not water soluble.
How to Make Hash- stage 3
If you have access to a paint mixer, put the mix on for 5 minutes or so. If you are doing it by hand, make sure there are no clumps of plant matter then stop shaking the mix.
How to Make Hash- stage 4
Wait for 30 minutes or longer, open the jar and remove the plant matter floating on the top. Put the material you remove in another jar and repeat the process to try to get the remaining resin.
How to Make Hash- stage 5
Wait for 15 minutes or more, keeping the jar as still as possible, then carefully pour off the water to within 1 inch of the material at the bottom of the jar. The bottom of the jar material is the hashish.
How to Make Hash- stage 6
Fill the jar with the hashish material with cold water as before, and let the mixture settle for a minimum of 15 minutes. Then carefully pour off the water to within 1 inch of the material at the bottom of the jar.
How to Make Hash- stage 7
Pour the hash material through a coffee filter. Make sure you get it all, it is potent. After the water has drained through the coffee filter, use a spoon to push the resin to an edge of the coffee filter, then roll the hash up in the filter, and gently squeeze out more water. After that wrap some paper towels around the filter and drain more moisture.
How to Make Hash- stage 8
Scrape the resin out of the filter and you have hashish. If you want to smoke the hash in a pipe you will have to press the resin into a solid mass by using your hands. If not, the hash will turn to a liquid when heated, and flow past your pipe screen.