hello this is my first hempy grow. right now im revegging 2 blueberry plants to make clones from, harvest and then transplant clones into hemp ybuckets. here is some background info on my setup:
i have a 400 w mh for veg and an hps bulb for flowering.
i plan on using no more than 4 3 gallon buckets with 100% perlite
i will be using alaska 5-1-1 fish fertz for veg and a 0-12-0 bat guano for flower brewed in a container with a powerful 2.7 liter air pump and bubble stone to which molasses and mychorizzae will be added as well as super thrive . i will use a 3.5ft by 3.5 ft by5.5 ft tall grow tent with reflectix mylar bubble wrap lining and a 250 cfm fan pulling air out of the top. i palnt to have 2 2.7 liter per minute air pumps with dual outputs so there will be 4 lengths of tubing total running to each of the 4 buckets with bubble discs attatched to the end of every tubeso that the 2 inches of water on the bottom are aerated. i plan to veg for 2 weeks under 20/4 and keep the temps during veg and flower at 75 during daytime and 72 at night, and humidity during veg at 60% and 50% during flower. i will be adding co2 with a tank from a beer distributor and am aiming for 1000 ppm during the day hours and shut off at night
does anyone think this is a good setup and how can i improve it other than upgraded lighting?
im hoping for 4oz per plant does this setup sound viable?
also shoudl i use coarse perlite or regular perlite?