Results 1 to 18 of 18

Thread: Need help getting into a lightbulb to make a vapourizer

  1. #1

    Join Date
    Mar 2014
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default Need help getting into a lightbulb to make a vapourizer

    Hey guys my first post here and i'm posting due to being in abit of a predicament! I'm trying to turn a lightbulb into a vape so i can smoke my bud as toxin free as possible due to having 2 pneumothoraxs (Collapsed lungs) in the past 3-4 months aswell as my doctor telling me not to smoke! and the problem is all the guides i see on getting into the innards is for lightbulbs like this:

    Click image for larger version. 

Name:	AzNQ2vE.jpg 
Views:	40 
Size:	26.8 KB 
ID:	256403

    When I have a lightbulb like this:

    Click image for larger version. 

Name:	ALP1QwU.jpg 
Views:	39 
Size:	60.8 KB 
ID:	256404

    Does anyone know how to break into it? I've been trying my best with a knife for ages really don't wanna smoke a joint due to it being realllllly bad for me! but the way the guides are doing it are confusing since i have a different bulb and never done anything like this before...

    Any help/suggestions would be great thanks

  2. #2

    Join Date
    Sep 2013
    Posts
    2,078
    Thanks
    1,814
    Thanked 2,809 Times in 1,398 Posts

    Default

    Try a hammer

  3. The Following User Says Thank You to KrazyDave For This Useful Post:


  4. #3

    Join Date
    Mar 2014
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Too much force will probably break

  5. #4

    Join Date
    Sep 2013
    Posts
    2,078
    Thanks
    1,814
    Thanked 2,809 Times in 1,398 Posts

    Default

    I wasnt being serious luv

    Have you tried heating it with a flame?

  6. #5

    Join Date
    Mar 2014
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    just tried now not doing much

  7. #6

    Join Date
    Sep 2013
    Posts
    2,078
    Thanks
    1,814
    Thanked 2,809 Times in 1,398 Posts

    Default

    Got a drill?

  8. #7

    Join Date
    Mar 2014
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    no mate i have sharp knives and a screwdriver >.<

  9. #8

    Join Date
    Sep 2013
    Posts
    2,078
    Thanks
    1,814
    Thanked 2,809 Times in 1,398 Posts

    Default

    Hammer it is then

  10. #9

    Join Date
    Mar 2014
    Posts
    5
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    hahaha I finally figured it out.. I Got a shoelace some turpentine wrapped the shoe lace around the very bottom of the glass part and then set it on fire spun the lightbulb for 20-30 secs then dropped in a bowl of cold water thanks for trying though mate

  11. The Following User Says Thank You to Kolto For This Useful Post:

    KrazyDave (22-03-14)

  12. #10

    Join Date
    Aug 2011
    Location
    High
    Posts
    473
    Thanks
    152
    Thanked 305 Times in 235 Posts

    Default

    I want to see this vap youv made

  13. #11

    Join Date
    Sep 2013
    Posts
    2,078
    Thanks
    1,814
    Thanked 2,809 Times in 1,398 Posts

    Default

    VERY clever thinking there dude. I was gonna say use a windproof but no need now eh lol

    So....

    A) How do you take apart the other type
    B) How do you turn it into a vape
    And
    C) Pics please

    Peace

    KD

  14. #12

    Join Date
    Sep 2011
    Location
    Ballybeg
    Posts
    1,000
    Thanks
    209
    Thanked 664 Times in 478 Posts

    Default

    Hot wire somehow, seen glass, wine bottles halved by heating a circular tong in a fire then clamping the bottle to heat, then dunked in water it cracked where it was heated.
    I dunno are you going to get satisfaction from that lightbulb, i have tried the shop bought version and did not rate it.

    You need a dimmable light to act as heatsource, Google Excellent DIY vaporizer cheeeeep!
    Want a $50 vaporizer that will vaporize any material and is easy to clean?

    Here is something I put together out of a $30 dual 150W quartz beam security lamp, by bolting the two lamps face to face and boring a hole for a test tube between them.

    The light reostat controls the temperature and the test tube has a two hole stopper in it, one for the out tube and one with an empty ball point pen refill to deliver the fresh make up air to the bottom of the tube.

    To use, place the material to be vaporized in the test tube, insert the stopper, and place it in the lamps. Adjust the lamps so that vapor forms without burning and draw it out through the tube.

    Tubes are cheap and to clean them, I soak them in alcohol and use a toothbrush.

    GW

  15. The Following User Says Thank You to brer For This Useful Post:

    KrazyDave (22-03-14)

  16. #13
    Bobby Digital Guest

    Default

    get a hack saw n cut the end off it, then get the screw driver in the bottom bit and break the bit inside. make sure you give it a good clean out then vape away

    i used to smoke meth so this i know what im talking about

  17. The Following 2 Users Say Thank You to Bobby Digital For This Useful Post:

    dynodave (23-03-14), Eggbox (23-03-14)

  18. #14

    Join Date
    Sep 2013
    Posts
    2,078
    Thanks
    1,814
    Thanked 2,809 Times in 1,398 Posts

    Default

    Quote Originally Posted by Bobby Digital View Post
    get a hack saw n cut the end off it, then get the screw driver in the bottom bit and break the bit inside. make sure you give it a good clean out then vape away

    i used to smoke meth so this i know what im talking about
    How do you vape with it tho?

  19. The Following User Says Thank You to KrazyDave For This Useful Post:

    W.S (23-03-14)

  20. #15

    Join Date
    Jul 2007
    Location
    uoıʇɐɔoן
    Posts
    7,466
    Thanks
    3,459
    Thanked 4,130 Times in 2,168 Posts

    Default

    More of a crackpipe than a vape

    You can buy very cheap glass vapes that use a lighter as a heatsource, but don't look quuiitttee as shady

  21. #16

    Join Date
    Jan 2013
    Location
    Scotland
    Posts
    1,244
    Thanks
    626
    Thanked 1,039 Times in 600 Posts

    Default

    Use a blow torch to melt the contacts connecting the glass to the metal but it would be easier and safer just buying a glass bulb from a head shop . But both are still quite shit for Vaping cannabis unless its for crack etc
    Attached Images Attached Images  
    My first Grow -https://www.thctalk.com/cannabis-foru...tealth-Drawers -Finnished Was updated daily and loads of pics

    2nd Grow - Blue Mystic - 600w HPS Cupboard Groom https://www.thctalk.com/cannabis-foru...as-Blue-Mistic Finnished

    3rd & 4th GrowFruit Spirit & Dinachem https://www.thctalk.com/cannabis-foru...-(fem)-in-Soil

    5th Grow Pineapple Kush & Somango XL (Current) https://www.thctalk.com/cannabis-foru...-Seeds-in-Soil

  22. #17

    Join Date
    Aug 2016
    Posts
    20
    Thanks
    7
    Thanked 19 Times in 13 Posts

    Default

    Buy a real vape dude

  23. #18

    Join Date
    Jun 2016
    Posts
    2,206
    Thanks
    6,006
    Thanked 4,306 Times in 1,702 Posts

    Default

    Quote Originally Posted by ay28 View Post
    Buy a real vape dude
    its two and a half years old mate, the thread, look at the date box top left of each post :-)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Quebec Cannabis Seeds

Bonza Seeds - Over 2000 Strains!     |     25% off Cannabis Seeds at Dr Chronic     |     GYO Seedbank     |     www.alibongocannabisseeds.co.uk

THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK