Page 1 of 2 1 2 LastLast
Results 1 to 10 of 19

Thread: THC Ejuice. Hopefully

  1. #1

    Join Date
    Mar 2011
    Location
    Button Moon
    Posts
    5,689
    Thanks
    2,793
    Been Thanked: 3,662 Times

    Default THC Ejuice. Hopefully

    Welcome to my THC Ejuice making experiment.

    I'm using Vegetable Glycerin (VG) for the base of my juice, available from the tinternet.
    £5 for 500ml



    I used.
    A kilner jar (jam making jar)
    Wooden stirrer
    Temp prob
    Pan
    Hot water
    Hob
    You will also need a away of squeezing the excess mix when the processing is complete. This can be any method you wish but bare in mind the mix will be hot when it comes to filtering.
    Tubs for storing and filtering the mix.

    I weighed out 10gram of dry trim that's between 3-12month old.
    The dryer the better as the VG will absorb and remaining water and along with it the chlorophyll.
    You can bake it in an oven at 90c for 20 mins or until it falls to bits when rolled between fingers.

    I then added to the jar enough VG to cover the trim and then a bit more on top (around 1") it turned out to be 400ml I used.

    Put this jar in the pan along with water and heat it all up until the mix gets to 80c then maintain this temp for 30 mins stirring frequently.

    When times up remove the jar and let it cool down to room temp.

    You should get somat like this after one heat and stir cycle.



    This needs repeating 5-6 times which is where I am at the moment.
    2 of 6 runs down.

    I still have to get some way of squeezing the excess juice from the trim come finishing
    Think I'll have to in my shed and knock somat up.

    That's it for now I'll update with pics later when I've done more heat and stir cycles.

  2. The Following 2 Users Say Thank You to Pugz For This Useful Post:

    GhostPGE (12-11-15), Mazzer (17-01-15)

  3. #2

    Join Date
    Aug 2012
    Location
    Highest of Heights
    Posts
    521
    Thanks
    397
    Been Thanked: 608 Times

    Default

    nice one, very interesting this, so it doesnt degrade the thc or CBD?

  4. The Following User Says Thank You to Mazzer For This Useful Post:

    Pugz (17-01-15)

  5. #3

    Join Date
    Mar 2011
    Location
    Button Moon
    Posts
    5,689
    Thanks
    2,793
    Been Thanked: 3,662 Times

    Default

    Quote Originally Posted by Mazzer View Post
    nice one, very interesting this, so it doesnt degrade the thc or CBD?
    No. Cause it's only heated to 80c the THC CBD CBNs turn molten but dont evaporate or vaporise.

    At the end I'll need to a decarb of the mix to activate the acids so that when its vaped it will get me high.

  6. #4

    Join Date
    Mar 2011
    Location
    Button Moon
    Posts
    5,689
    Thanks
    2,793
    Been Thanked: 3,662 Times

    Default

    I've been looking at different recipes for this stuff and the amounts off weed and VG used.
    I decided it would be easier if I could work out how much weed/1ml VG these recipes were using.
    Only thing is I'm not overly confident with my results.
    Here's what I've found so far in the recipes and I think I've worked out the W/VG ratio?
    Ive divided the W by the VG
    5.5g W - 60ml VG = 0.091 g/1ml
    28g W - 1000ml VG = 0.028g/1ml
    10g W - 400ml VG = 0.025g/1ml
    I know the calculation is correct but is the answer I've got truly the g/ml?

    Next question lol.
    If I wanted say 2g of weed in my 1.6ml cartridge and I wanted to make a 100ml batch.
    What would be the formula to work this out.

    Times like these I wish I'd payed more attention at school lol.

    Cheers Pugz

  7. #5

    Join Date
    Oct 2014
    Posts
    501
    Thanks
    384
    Been Thanked: 687 Times

    Default

    I have been making my own juice for a long time you want to do a 70/30 vg-pg (propylene glycol) for the thc to not seperate once the mixture is cooled down. The pg binds the thc and vg

  8. The Following 2 Users Say Thank You to alwayslearnin For This Useful Post:

    Pugz (18-01-15), SkunkBudda403 (06-11-15)

  9. #6

    Join Date
    Mar 2011
    Location
    Button Moon
    Posts
    5,689
    Thanks
    2,793
    Been Thanked: 3,662 Times

    Default

    Quote Originally Posted by alwayslearnin View Post
    I have been making my own juice for a long time you want to do a 70/30 vg-pg (propylene glycol) for the thc to not seperate once the mixture is cooled down. The pg binds the thc and vg
    Thanks.

    Can this be added later after the mix is finished ?

  10. #7

    Join Date
    Dec 2013
    Posts
    723
    Thanks
    329
    Been Thanked: 895 Times

    Question

    Quote Originally Posted by Pugz View Post
    I've been looking at different recipes for this stuff and the amounts off weed and VG used.
    I decided it would be easier if I could work out how much weed/1ml VG these recipes were using.
    Only thing is I'm not overly confident with my results.
    Here's what I've found so far in the recipes and I think I've worked out the W/VG ratio?
    Ive divided the W by the VG
    5.5g W - 60ml VG = 0.091 g/1ml
    28g W - 1000ml VG = 0.028g/1ml
    10g W - 400ml VG = 0.025g/1ml
    I know the calculation is correct but is the answer I've got truly the g/ml?

    Next question lol.
    If I wanted say 2g of weed in my 1.6ml cartridge and I wanted to make a 100ml batch.
    What would be the formula to work this out.

    Times like these I wish I'd payed more attention at school lol.

    Cheers Pugz

    125g/100ml gets you 2g/1.6ml

  11. The Following User Says Thank You to THE DARK KNIGHT For This Useful Post:

    Pugz (18-01-15)

  12. #8

    Join Date
    Dec 2013
    Posts
    723
    Thanks
    329
    Been Thanked: 895 Times

    Default

    Is it possible to get such a high concentrate?

  13. The Following User Says Thank You to THE DARK KNIGHT For This Useful Post:

    Pugz (18-01-15)

  14. #9

    Join Date
    Dec 2013
    Posts
    723
    Thanks
    329
    Been Thanked: 895 Times

    Default

    Would it be better to use Uve bags to extract the thc from yoThe trim first, then mix it with the VG? Would that be any better/worse?

    IM extremely interested In this, going to try this myself! Any thorough guides on doing this anywhere?

  15. The Following 2 Users Say Thank You to THE DARK KNIGHT For This Useful Post:

    Pugz (18-01-15), SkunkBudda403 (06-11-15)

  16. #10

    Join Date
    Mar 2011
    Location
    Button Moon
    Posts
    5,689
    Thanks
    2,793
    Been Thanked: 3,662 Times

    Default

    Quote Originally Posted by THE DARK KNIGHT View Post
    125g/100ml gets you 2g/1.6ml
    Thanks but what equation did you use.
    So I can work out any dose of weed to VG to ml

    Soz if I'm not making much sense lol but I seem to have a mental block with maths

Page 1 of 2 1 2 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States