A few people have asked me lately so it's time that I put a thread together on the subject...
What you will need:-
Some silver wire (Ebay's a good source)
a 9v battery
A jar
Some ordinary wire (My designs a bit posher but it doesn't have to be as professional in the finish...)
Deionised water (distilled will work too)
I used an old 100g coffee jar (wash it out thoroughly!) and poked two holes in the lid
Then cut 2 lengths of silver wire to a length that's almost the depth of the jar
I used a glue gun but sticky tape will work. Push the silver wire through the lid leaving about an inch showing on the top & secure...
Straighten out kinks in the wire & try to have them parallel to each other
Add some water to the jar (there's about 250ml in mine)
Put the lid on the jar & mke sure that the wires aren't touching the bottom, if they are trim them so they are about an inch from the bottom..
I taped my battery to the side of the jar more for convenience as everything then can be moved with just one hand
Being a posh git I have a 9v battery connector and mini crocodile clips (99p each from ebay) for easy connection...
Connect the clips to the silver wire... doesn't matter which way around...
Connect battery...
Put it in a safe area, out of direct sunlight & wait 24hrs & job done... you have colloidal silver
Bear in mind that this isn't 'food grade' so don't go drinking it
It's simple enough but any questions just ask
Bookmarks