Cheers Ice mate, good to have you on board.
Couple of pics from the archive dusted off here - one is my recent seed order with the Bluematics, as well as a Bubble Kush I kind of want to try next and a bunch of freebies, and then a few from my last grow to show what the space looks like. I don't want to do another essay about how I built the thing here because there's plenty of info elsewhere, but any questions by all means fire away.
In a nutshell the case is rubber lined for insulation, with a light trap/intake fan at the bottom pulling air from underneath, a pair of DIY carbon filters at the top with fans in a push-pull config to keep the airflow to noise ratio in my favour, one airflow fan inside and 6 Samsung Q-series LED strips powered at up to 34W from an external Mean Well driver - all the mains electrics are external to the case now for heat and peace of mind. I have all the fans hooked up to one PWM speed controller, which is normally kept on dead low but can go up if temps do, and temps and humidity are monitored with two cheapo probes inside connected to displays in the front of the case with the fan controller - it's a swing door case design so they're still hidden away.
Bookmarks