So my tent has only left side holes, and one on the top.. id like to cut two more holes on the right side, any tips? Dont wana make perma dmg lol
Sent from my Redmi Note 7 using Tapatalk
So my tent has only left side holes, and one on the top.. id like to cut two more holes on the right side, any tips? Dont wana make perma dmg lol
Sent from my Redmi Note 7 using Tapatalk
Off the top of my head you could cut the holes then stick pieces of duct tape round the edge where you've cut essentially stopping the threading coming away and fucking the hole, duct tape has a million uses, just make sure it'll actually stick to the tent well enough first, and use a stanley. Then just cover it with reflective sheet if you want the other holes used instead. As long as you're careful with the hole til the duct tapes on I can't see what the problem would be. Depends how desperate you are to use different holes. Where there's a will there's a way an all that.
Theres secret jardins on the market that come with a little kit to cut your own holes in the tent.
Might be called dark streets....a canny mind?
But Im sure its got these in it. A flange n coupler. Screw them together on either side of tent. Then cut your hole. Will give it a better finnish.
Sent from my SM-G930F using Tapatalk
This tent only came with A 6" hole on the top, I needed A 9" hole, so just cut it out to fit my 9" fan. I have had this tent up and down twice in the last two years, and never tape it or nothing, and it is still all there.
Ohhh damn . Very unsual i dont have a fix for things but sewing and fabrics im not good with
.
Maybe make 2 sheetmetal flanges . Bolt on both sides after cutting a nice clean hole and work your duct through that .
Super OG Kush & Sour Diesel Journal
https://r.tapatalk.com/shareLink/top...ink_source=app
GEORGE (08-11-19)
Just noticed I never added the pic in my first post lol.
Flange + Coupler.
Sent from my SM-G930F using Tapatalk
AND (08-11-19), GEORGE (08-11-19), IceCalibur (08-11-19), Shreder (08-11-19), Trex (08-11-19)
Another one
Cut hole 30mm smaller than you need then cut out towards that 30mm line from the hole at 1/16th intervals (like a clock) then use iron on hemming tape to seal (or gaffer/duct tape, lol)
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks