Hello chaps, never tried making hash before so I thought I’d give it a bash and document it
Turned out a lot better than expected if I’m honest, ideally would have liked more return but that will come with practice and better conditions but whatever, here’s how I made it
(I didn’t realise how much trim I actually had until I weighed it)
I got my hands on one of them sifting boxes, probably a lot better equipment out there for making it, but for my needs it was perfect.
I then bagged up all my trim, and set aside in the freezer for a hour
After this was done, I then took about a medium size handful of trim, placed in the box, and gave a little mix up with my hands. Then the lid went on and I gently gave it a good shake for about 30 seconds,
Once this was done, after each handful I removed all the thc from the bottom panel (flat glass layer) and placed to one side,
I continued this process with the rest of the bag (for this run I only used the one bag of trim to test this out, didn’t want to mess it all up and be out of from ) and I ended up with about 1.5 grams of thc
Once this was all gathered, I filled up a glass bottle with boiling water and set aside for a few minutes to cool down slightly.
I then placed all the thc in to non stick baking paper, again there is probably better equipment to use but this worked well for me.
Once the above is done, fold the baking paper over to trap the thc inside. Then with the bottle of water, I began to press/roll this over the thc until I could feel it begin to mould together (didn’t take long, about 30 seconds)
I kept folding the now, early stage hash over and over, and repeated the process 3 times.
And after my last roll, I took my hah and gave it a little roll in my hand and ended up with this
So there we have it nice little temple ball for me to enjoy later
Sent from my iPhone using Tapatalk
Bookmarks