I have an 80x80x180cm tent and a vividled 150watt quantum board can anyone recommend a silent extraction fan and filter and intake fan setup. The ducting would be roughly 80inch long and would have 2 bends. Cheers
I have an 80x80x180cm tent and a vividled 150watt quantum board can anyone recommend a silent extraction fan and filter and intake fan setup. The ducting would be roughly 80inch long and would have 2 bends. Cheers
GEORGE (18-04-20)
A 4" RVK & Rhino should do the trick... but a 5" with a fan controller may be quieter... see what others think as I'm not really up on LED heat
It's Not What You Know, It's What You Can Prove
agree with M_C, the 4" extraction, minus 25% after the Carbon Filter is added will give you around 138 m3/h when, given your tent size, you're needing 130 m3/h including your filter and duct bends as a minimum.
These boards can run hot (is it adjustable wattage?) and I'd be looking at a 5" rvk (220 m3/h -25% with filter = 165 m3/h) as a minimum (growing in Summer?) or even better, a 5" L1 rvk (323 m3/h - 25% with filter = 242 m3/h) on a speed controller which should give adequate cooling while reducing noise a good bit and allow all year 'round growing.
For intake, I'd setup a 4" rvk, and use with the 5" extraction, as and when required or just passive intake (ie: no intake fan) in the cooler months.
cheers
Last edited by tlh2496; 03-05-20 at 02:24 PM.
THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States
Bookmarks