Hi
I'm just a week into the point of starting the germination for my seeds
As is in my diary in the newbie corner on the diaries section....
I have my lights about 1m above the top of the airports
I hadn't turned the fans on yet but started getting a bit too warm (around 27-28C and 70-75% humidity, so then turned the fan on. On full speed it got a bit low for now, around 21C
This reading was on a Sonoff TH16 probe that is currently dangling through one of the top holes and dangling down as low as it can go which is a small amount above the parabolic shade
At the moment I have my RVK fan set to as low a speed as it possibly can without turning off on the fan speed controller dial.
I have now placed a Taotronics humidifier on the opposite side of the tent, and have turned this on and set its humidity setting to 70%. At the time it turned on it was reading saying it was 59% humidity (when the Sonoff probe higher up was reporting 47%
The tent is now closed up again and on checking, the TH16 on the eWelink app on the phone is now reporting as being 24.8C and 54% Humidity
TLDR : Is it normal for the humidity reading higher in the tent to be lower % than that at the bottom?
Cheers
Bookmarks