Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 48

Thread: First go at cloning. First go at cloning.

  1. #1

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default First go at cloning. First go at cloning.

    So then, I accidentally set myself on a journey. See here https://www.thctalk.com/cannabis-for...dam-and-Eve-it

    I've setup this tub as a propagator, got an average humidity of 64% inside the box, heat about 23-24c. Stuck a hose on the end of the humidifier and fed it into the box through the bench and lid. It's on 75% + today though. Also got a pc fan at one end on 3v and a few holes on the opposite side, get some fresh air through, doesn't seem to affect heat/hum.

    Not much else to say atm, followed Bud's guide best I could regards taking clones, was pretty simple but so am I Any criticism welcome. Main things on my mind atm are how wet should the root cubes be, right now they're just moist, not saturated. Is the best way to keep em wet to just drip water on em? Also how often am I looking to spray the clones with water? As I'll be doin it by hand.

    Some phiotios

    Mama



    Setup






    Dunno what the feck I was thinkin when I made that tin foil contraption already replaced it

    Strain is Blue dream by Humboldt, little led light above it...lets make some babies

  2. The Following 6 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), Easy-T (15-09-20), hotshot (15-09-20), IceCalibur (15-09-20), M_C (15-09-20), WhIpLaSh (15-09-20)

  3. Default

    Love it, well done MrCanna, cracking job, good bit of diy that..should work perfectly!

    With the root riots, I used to stick them in some water, let them soak up what they can, then squeeze out the access bud, that way they're not dripping/soaking, but no dry spots.

    When/if they start drying out, just water them as you normally would, doesn't need much and making sure they're not sitting in any puddles after

  4. The Following 4 Users Say Thank You to IceCalibur For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), Lowrollerbean (15-09-20), MrCannab1sir (15-09-20)

  5. #3

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Quote Originally Posted by IceCalibur View Post
    Love it, well done MrCanna, cracking job, good bit of diy that..should work perfectly!

    With the root riots, I used to stick them in some water, let them soak up what they can, then squeeze out the access bud, that way they're not dripping/soaking, but no dry spots.

    When/if they start drying out, just water them as you normally would, doesn't need much and making sure they're not sitting in any puddles after
    Thanks man, one of the few occasions the build fell just right, even had a hole in the table for the hose, pre drilled to clamp the rosin press lol. I'll be keepin a close eye on em. Be lookin to flower the mother end of september so plenty of time to try with the clones. Should get a nice pile of christmas bud off that main plant.

  6. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), IceCalibur (15-09-20)

  7. #4

    Join Date
    Dec 2016
    Posts
    5,983
    Thanks
    22,174
    Thanked 27,848 Times in 5,824 Posts

    Default

    Love a build, nice job, MrC! Let's see them rootsssssss!
    ----------------------------------------------------
    RDWC diary under IS quantum boards (mentored by British green) https://bit.ly/2VjQGYy

  8. The Following 3 Users Say Thank You to WhIpLaSh For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), MrCannab1sir (15-09-20)

  9. #5

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    What's the 25L bowser do on the left?

    Sent from my SM-G975F using Tapatalk

  10. The Following 3 Users Say Thank You to Dirty_badger For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), MrCannab1sir (15-09-20)

  11. #6

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Quote Originally Posted by WhIpLaSh View Post
    Love a build, nice job, MrC! Let's see them rootsssssss!
    Here's hopin, it's a beauty of a strain, smoked a lot of it

    Quote Originally Posted by Dirty_badger View Post
    What's the 25L bowser do on the left?

    Sent from my SM-G975F using Tapatalk
    I got 2 of em to fill up and keep downstairs as I was using at least 18-20 ltrs each feed/watering, so just cuz I'm lazy and can't be arsed to keep walking up and down the stairs with buckets really

  12. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), Dirty_badger (15-09-20), hotshot (15-09-20)

  13. #7

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    Fair play dude. I'd deffo bang a push fit supply in straight through the ceiling

    Sent from my SM-G975F using Tapatalk

  14. The Following 3 Users Say Thank You to Dirty_badger For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), MrCannab1sir (15-09-20)

  15. #8

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Quote Originally Posted by Dirty_badger View Post
    Fair play dude. I'd deffo bang a push fit supply in straight through the ceiling

    Sent from my SM-G975F using Tapatalk
    Just had a quick look at that, I'll de;ve deeper later. What would ya do, hook it up under the kitchen sink and feed it down?

  16. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), Dirty_badger (15-09-20), hotshot (15-09-20)

  17. #9

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    Your kitchen upstairs?

    Sent from my SM-G975F using Tapatalk

  18. The Following 3 Users Say Thank You to Dirty_badger For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), MrCannab1sir (15-09-20)

  19. #10

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Quote Originally Posted by Dirty_badger View Post
    Your kitchen upstairs?

    Sent from my SM-G975F using Tapatalk
    Yeh man, it's garage and utility/grow room on ground floor, kitchen and lounge on 1st then bedrooms and bath on 2nd. Tbf the washing machine is in utility room so could maybe hook something up to that to fill barrels up?

  20. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), Dirty_badger (15-09-20), hotshot (15-09-20)

  21. #11

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    Yeah definitely dude. I always use JG speed fitting, they're oushfit and guaranteed for 50 years. You'll just need to tee off the supply to your washer then run the pipe to where you need it with a tap on the end

    Have let me know if you're struggling

    Sent from my SM-G975F using Tapatalk

  22. The Following 5 Users Say Thank You to Dirty_badger For This Useful Post:

    Blue61 (17-09-20), grower1988 (15-09-20), hotshot (15-09-20), IceCalibur (15-09-20), MrCannab1sir (15-09-20)

  23. #12

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Cheers man, right up your street. Only plumbing I've done really is unclog the pipe that drains the bath. Thought I was pulling a dead rat outta there ffs, fair do's to plumbers, they deserve a medal lol

  24. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), Dirty_badger (15-09-20), hotshot (15-09-20)

  25. #13

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    Quote Originally Posted by MrCannab1sir View Post
    Cheers man, right up your street. Only plumbing I've done really is unclog the pipe that drains the bath. Thought I was pulling a dead rat outta there ffs, fair do's to plumbers, they deserve a medal lol
    Saying goes, if you can piss you can plumb

    Sent from my SM-G975F using Tapatalk

  26. The Following 3 Users Say Thank You to Dirty_badger For This Useful Post:

    Blue61 (17-09-20), hotshot (15-09-20), MrCannab1sir (15-09-20)

  27. #14

    Join Date
    Jul 2013
    Posts
    2,738
    Thanks
    755
    Thanked 3,243 Times in 1,553 Posts

    Default

    looking good mate. Keep your eyes peeled for roots after 3 days they can be slow at rooting but some can be quick always remember to take more cuttings than you need as sometimes they don't always root good luck

    Please note: This website runs a rule of ONLY 10 plants. Please follow this rule. You can check our other rules Here

    If I or anyone else has answered your question in the growing questions and answers section please mark it as "Answered". It helps keep the forum tidy!

  28. The Following 2 Users Say Thank You to SyRaX For This Useful Post:

    Dirty_badger (16-09-20), hotshot (16-09-20)

  29. #15

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Survived the night, the first ones I attempted drooped after 30 minutes but they were just cut and thrown in soil lol. What temp should I aim for? 23c is the highest it goes naturally, may need a 1ft tube heater


  30. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), hotshot (16-09-20), IceCalibur (16-09-20)

  31. Default

    Quote Originally Posted by MrCannab1sir View Post
    Survived the night, the first ones I attempted drooped after 30 minutes but they were just cut and thrown in soil lol. What temp should I aim for? 23c is the highest it goes naturally, may need a 1ft tube heater
    I have a good feeling about these MrCanna..and anything above 20c and you're golden I'd say

  32. The Following 3 Users Say Thank You to IceCalibur For This Useful Post:

    Blue61 (17-09-20), hotshot (16-09-20), MrCannab1sir (16-09-20)

  33. #17

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Quote Originally Posted by IceCalibur View Post
    I have a good feeling about these MrCanna..and anything above 20c and you're golden I'd say
    Cheers man, they're lookin healthy, gonna re wet the sponges soon. I reckon I should be OK without a heater then.

  34. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), hotshot (16-09-20), IceCalibur (16-09-20)

  35. #18

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    Look good they do dude

    Sent from my SM-G975F using Tapatalk

  36. The Following 2 Users Say Thank You to Dirty_badger For This Useful Post:

    hotshot (16-09-20), MrCannab1sir (16-09-20)

  37. #19

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    3,528
    Thanks
    6,029
    Thanked 15,219 Times in 3,540 Posts

    Default

    Cheers man, put the humidifier to 15 min on, 30 min off, keepin humidity in the 80s. Temps usually 22c-23c, I'll start checkin for roots tomorrow. What size pot do they normally get put into next? Aparty cup or something so they can establish some roots?

  38. The Following 3 Users Say Thank You to MrCannab1sir For This Useful Post:

    Blue61 (17-09-20), Dirty_badger (16-09-20), hotshot (16-09-20)

  39. #20

    Join Date
    Feb 2015
    Posts
    3,417
    Thanks
    2,509
    Thanked 8,215 Times in 2,728 Posts

    Default

    Mine go straight in my DWC system dude. Not sure about potting up

    Sent from my SM-G975F using Tapatalk

  40. The Following 2 Users Say Thank You to Dirty_badger For This Useful Post:

    hotshot (16-09-20), MrCannab1sir (16-09-20)

Page 1 of 3 1 2 3 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States