hey guys i have a meanwell 709-HLG-600H-54A
I have the driver hooked up to my lights and they are on.
I hooked the dimmer switch up but it wont' dim the lights. If I turn the knob all the way to the left it will shut them off but it won't dim them in between
The dimmer has two wires. Red and brown
There's 3 wires coming out of my driver
red, brown, and yellow.
I hooked up the red and brown wires to each other and i turn the dimmer knob to the left and it just shuts the lights off.
So i thought maybe the yellow wire has to be hooked up to the positive side to cut the power down...nope...does nothing.
On the driver next to the yellow wire it says +5
Does the yellow wire need hooked up to the negative side then?
Any help would be appreciated.
Bookmarks