Hi all, I’m hoping someone pops in here that’s done a similar build.
I’m going to build a partition wall about 2/3 in to my garage so the back 3rd will be my “growing” space, by the time I’m finished with it, it’l be it’s own room. The garage is about 3m wide, 2.5 meters tall and I want to have my wall about 2.2-2.5m deep from the back wall. The walls are double bricked but I still get some extreme temperature differences.
I’m going to be using celotex/kingspan on the walls and il just use rock wool on the ceiling between the joists then ply board it. What’s the best way to stick the celotex/kingspan to the walls? Should I baton them first or could I just stick them straight to the wall?
Bookmarks