PG/VG cannabis juice

[Mise]

I recently converted some cannabis into an ejuice as per these instructions:


I initially used a Nautilus X Tank and fried a couple of coils keep in mind that I only started vaping CBD a couple of weeks before hand and don't understand much about vaping.

I dug around a little and then came up with a Guardian Tank with Mini CCell coils. I was managing to keep from frying the liquid, by going very easy on the vape juice, that was until I somehow broke the glass on the bloody Tank.

What I am asking now is - how the hell do I vape the cannabis juice without spending a fortune?

I have more Mini CCell-GD coils left but would have to buy a new Guardian Tank unless anyone knows a cheaper tank that they will fit. I read about RDA rigs but I really am a newbie and need it to be as easy as possible and as stealthy as possible.



TL;DR

How do I vape cannabis juice easily and stealthily without spending a fortune?

[Bud Lightyear]

No links mate sorry..


Regards BL

[M_C]

It's something I've done in the past, just be aware that VG needs more 'oomph' than PG to vaporise it... and don't use cheap devices! If you can't alter the vape's power then it probably isn't up to the job...

[Mise]

No links mate sorry..


Regards BL

Sorry mate, just was showing what was done in case it was relevant.

OK - long hand -

Decarboxylated Cannabis

Mixed with PG/VG @ a 50/50 ratio

Cooked at 80c for about 4 hours

Cool

Add flavours

VAPE

It's something I've done in the past, just be aware that VG needs more 'oomph' than PG to vaporise it... and don't use cheap devices! If you can't alter the vape's power then it probably isn't up to the job...

I am using an Innokin Silver Cool Fire IV Box Mod which can change from about 8w - 40w and initially the Nautilus then Guardian tanks with the respective coils. I figured the oil was too thick and 'watered' it down with more PG to what's more a 60/40 ratio than the 50/50 I started with and was going fine, but not great, with the Guardian.

Since I have to shell out £25 or so for a new Guardian tank I figured I might as well get some decent advice and get something that will work better.

[MrC]

I use a pockex aspire for ejuice, pretty sure its M_C's recipe

[Mise]

I use a pockex aspire for ejuice, pretty sure its M_C's recipe

The Guardian Tank has .6 ohm coils and Nautilus X has 1.8 ohm ones. From a site on the PockeX - The 1.2 ? coil works well with e-liquids with a VG:PG ratio of 50:50. The 0.6 ? coil works well with e-liquids with a VG:PG ratio in the region of 70:30.

So going by that my juice has a high ratio of VG I would be better using the tank with the 0.6+ ohm coil (which would be in keeping with my experience)? Am I stuck buying the Guardian tank again or can I use its CCELL-GD Ceramic Coils on another tank?

Excuse my ignorance but what is M_C's recipe?

[M_C]

Excuse my ignorance but what is M_C's recipe?

Usually just what I have to hand at the time - I'm sure I've done a write up on this somewhere?

[M_C]

Found the thread... It was from when I'd last done Black lemon & the juice came out pink

https://www.thctalk.com/cannabis-for...-makes-eJuice-)

[MrC]

Found the thread... It was from when I'd last done Black lemon & the juice came out pink

https://www.thctalk.com/cannabis-for...-makes-eJuice-)

Yeh that's the one, works a treat, nice one

[M_C]

I may try & get back into it again this year. I bought a load of stuff for things like this... then stopped smoking & had to turn my back on all of it. It was hard but worth it... now I need to get back into concentrates again