What fan and filter will I need for 1.2x0.6x1.8m tent

**acerd** · 24-01-21, 04:54 PM

Hi looking for bit off advice just ordered 1.2x0.6 x1.8m tent
And mars hydro light not sure on what brand or size of fan I will need for carbon filter
Any advice would be appreciated

**gardro** · 24-01-21, 06:00 PM

Assuming you will be using 2-300w I would suggest 4-5inch carbon filter and fan. You should also get a fan controller

**Farmer Geddon** · 26-01-21, 04:38 PM

If you are absolutely certain that you'll never get a bigger tent/cab, then 4" should be adequate for your size tent with led. For the airflow you get from 4", they are on the noisier side. For the same airflow, a slowed down 6" fan will be much quieter. It also makes you future proof if and when you want to increase the grow area.

rvk extractor fans are very reliable so buying bigger than you currently need is rarely a mistake.

Plan the grow so that the ducting is as short and as straight as possible. Keep bends to the minimum, smooth angles, no kinks.

**Razzmatazz** · 26-01-21, 04:59 PM

I have 2 tents I'm settling up a 3x4 ft dual compartment and a 5x5 I'm going 6inc in the big tent and4 in smaller then I'm looking at micro mall fans witch seem to be a copy of the ac infinity fan are they any good they are about 30 percent cheaper

**Mac** · 26-01-21, 05:03 PM

Don't know about the micro mall fans but I have an AC infinity and its been solid so far. If the copy is up to scratch it will be a decent fan.

**Monty719** · 26-01-21, 08:44 PM

I bought a 4" inline from ac infinity along with the 4" filter i have a 4x4 tent and it works great.Best thing about it is it has highs and lows you can set for temp and humidity so it will kick on according to your settings. This fan is also super quiet im happy with it