Hey, all.
Been tinkering with 67, trying to get a feel for it.
Spent a couple hours tracking temp readings under a few different conditions with a 600w MH running.
The ambient temp of the room is 71F/22C. The exhaust vents out the window.
Just tossing this out there to see if these numbers seem to make sense, and if my plan makes sense.
Not that it's rocket science, but I'm only a brain surgeon.
I ran the controller on Auto.
High temp trigger = 83F/28C
ON = fan seed 6
OFF = fan speed 2
A few results:
Stuck at 90F/32C at 12" from senor - fan maxed at 6
86F/30C at 18" - fan running 6
I opened 2nd passive port.
89F/32C at 12" - fan running 6
85F/29C at 18" - fan running 6
I get the impression that I need to cool the room that the tent is in by around 10 degrees to maintain a safe upper temperature limit; without the fan going balls out as well. Make sense?
Thanks.
Bookmarks