Results 1 to 7 of 7

Thread: Cloudline 67 Controller

  1. #1

    Join Date
    Jan 2020
    Location
    US
    Posts
    486
    Thanks
    8,849
    Been Thanked: 3,052 Times

    Default Cloudline 67 Controller

    Hey, all.

    Been tinkering with 67, trying to get a feel for it.
    Spent a couple hours tracking temp readings under a few different conditions with a 600w MH running.
    The ambient temp of the room is 71F/22C. The exhaust vents out the window.
    Just tossing this out there to see if these numbers seem to make sense, and if my plan makes sense.
    Not that it's rocket science, but I'm only a brain surgeon.


    I ran the controller on Auto.
    High temp trigger = 83F/28C
    ON = fan seed 6
    OFF = fan speed 2

    A few results:

    Stuck at 90F/32C at 12" from senor - fan maxed at 6
    86F/30C at 18" - fan running 6

    I opened 2nd passive port.
    89F/32C at 12" - fan running 6
    85F/29C at 18" - fan running 6

    I get the impression that I need to cool the room that the tent is in by around 10 degrees to maintain a safe upper temperature limit; without the fan going balls out as well. Make sense?

    Thanks.
    ~It's a violent universe~

  2. The Following 3 Users Say Thank You to Sir Digby Chicken Caesar For This Useful Post:

    Blue61 (18-03-21), GEORGE (18-03-21), Skunkpunch (18-03-21)

  3. #2

    Join Date
    Apr 2011
    Location
    south east coast u.s.a.
    Posts
    6,350
    Thanks
    61,506
    Been Thanked: 35,418 Times

    Default

    Hey man, Mac put up a post here;
    https://www.thctalk.com/cannabis-for...post1071168559

    Post #5687 I think this might help ya. If not still a good read.

  4. The Following 4 Users Say Thank You to Blue61 For This Useful Post:

    GEORGE (18-03-21), scoot (06-04-21), Sir Digby Chicken Caesar (18-03-21), Skunkpunch (18-03-21)

  5. #3

    Join Date
    Jan 2020
    Location
    US
    Posts
    486
    Thanks
    8,849
    Been Thanked: 3,052 Times

    Default

    Quote Originally Posted by Blue61 View Post
    Hey man, Mac put up a post here;
    https://www.thctalk.com/cannabis-for...post1071168559

    Post #5687 I think this might help ya. If not still a good read.
    Thanks, man. If I'm reading correctly it seems like I have it set up the same way.
    I have the 2 degree transition set, and all the other triggers disabled. Will work in High humidity trigger later on.
    Just seems like I need some cooling to bring temps in range.

  6. The Following 5 Users Say Thank You to Sir Digby Chicken Caesar For This Useful Post:

    Blue61 (19-03-21), GEORGE (18-03-21), Karsa (19-03-21), scoot (06-04-21), Skunkpunch (18-03-21)

  7. #4

    Join Date
    Sep 2017
    Location
    Laederon Plateau on the northern edge of the continent of Genabackis.
    Posts
    3,675
    Thanks
    7,272
    Been Thanked: 10,313 Times

    Default

    Quote Originally Posted by Sir Digby Chicken Caesar View Post
    Thanks, man. If I'm reading correctly it seems like I have it set up the same way.
    I have the 2 degree transition set, and all the other triggers disabled. Will work in High humidity trigger later on.
    Just seems like I need some cooling to bring temps in range.
    Where are you venting too and pulling air from?

    Sent from my J8210 using Tapatalk

  8. The Following 3 Users Say Thank You to Karsa For This Useful Post:

    GEORGE (19-03-21), scoot (06-04-21), Sir Digby Chicken Caesar (19-03-21)

  9. #5

    Join Date
    Jan 2020
    Location
    US
    Posts
    486
    Thanks
    8,849
    Been Thanked: 3,052 Times

    Default

    the fan pulls air from the the center of the tent, above the parabolic.
    The 6" ducting runs out the side port and then a few feet to a window unit.

    I should've held off on this thread. Just need time to experiment some more.

    Thanks.

  10. The Following 3 Users Say Thank You to Sir Digby Chicken Caesar For This Useful Post:

    Blue61 (19-03-21), GEORGE (19-03-21), scoot (06-04-21)

  11. #6

    Join Date
    Apr 2011
    Location
    south east coast u.s.a.
    Posts
    6,350
    Thanks
    61,506
    Been Thanked: 35,418 Times

    Default

    Quote Originally Posted by Sir Digby Chicken Caesar View Post
    the fan pulls air from the the center of the tent, above the parabolic.
    The 6" ducting runs out the side port and then a few feet to a window unit.

    I should've held off on this thread. Just need time to experiment some more.

    Thanks.
    Nothing wrong with having it up now. Some gems might come up and give ya a light bulb moment.

  12. The Following 4 Users Say Thank You to Blue61 For This Useful Post:

    GEORGE (19-03-21), Karsa (19-03-21), scoot (06-04-21), Sir Digby Chicken Caesar (04-04-21)

  13. #7

    Join Date
    Jan 2020
    Location
    US
    Posts
    486
    Thanks
    8,849
    Been Thanked: 3,052 Times

    Default

    I started a new thread.
    Think my questions were more general, less specific to this controller.

    https://www.thctalk.com/cannabis-for...post1071173947

  14. The Following 2 Users Say Thank You to Sir Digby Chicken Caesar For This Useful Post:

    GEORGE (06-04-21), scoot (06-04-21)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States