Results 1 to 9 of 9

Thread: 3rd time lucky! 260w LED TSE&Barneys Auto Run

  1. #1

    Join Date
    Jun 2020
    Posts
    128
    Thanks
    152
    Been Thanked: 564 Times

    Default 3rd time lucky! 260w LED TSE&Barneys Auto Run

    Hey guys! Hope everyone is doing ok in these not so normal times...

    I've set up again! Previous 2 tries went ok.. I lost my motivation after the second run as they took bloody ages and the yield/quality wasn't great.

    I think a combination of overwatering at the start of the cycle and using a convector heater inside the tent did absolutely no good whatsoever.

    Anyway...

    I've made a few changes - gone with 7ltr pots instead of 11 so I can control them better for LST (also meant I could put trays under them), swapped out the convector heater for an oil fin radiator and changed the air intake so it pulls directly from outside instead of inside.. fingers crossed it helps...


    3 Autoflowers -
    1 x Mendo Mass - Top Shelf Elite
    1 x Mango Mass - Top Shelf Elite
    1 x Tangerine Dream - Barneys Farm

    Feel free to sub if you like! Be good to see the familiar faces that helped me along and dropped some pointers last time.. as always its much appreciated!

    ATB :smoke:

    L0w

  2. The Following 7 Users Say Thank You to L0wdawg For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), Greengrass (30-03-21), Herbitual (30-03-21), Lowrollerbean (30-03-21), MrC (30-03-21)

  3. #2

    Join Date
    Sep 2017
    Location
    Softwater, UK
    Posts
    9,267
    Thanks
    18,336
    Been Thanked: 52,286 Times

    Default

    Good luck, fella!

    What is your starting Wattage - and what lamp are you using?
    https://www.thctalk.com/cannabis-forum/signaturepics/sigpic82640_3.gif

    Neckbeard, cute dog, pansy-ass fuck* pursuing herb immunity since 1966

    *TM. HazyClouds (RIP)

  4. The Following 4 Users Say Thank You to Herbitual For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), L0wdawg (30-03-21)

  5. #3

    Join Date
    Sep 2019
    Location
    Royston Vasey
    Posts
    10,304
    Thanks
    21,312
    Been Thanked: 63,020 Times

    Default

    Good luck mate, subbed up. 3rd time lucky eh

  6. The Following 4 Users Say Thank You to MrC For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), L0wdawg (30-03-21)

  7. #4

    Join Date
    Jun 2020
    Posts
    128
    Thanks
    152
    Been Thanked: 564 Times

    Default

    Quote Originally Posted by Herbitual View Post
    Good luck, fella!

    What is your starting Wattage - and what lamp are you using?
    Thanks!

    I can't change the light according to wattage unfortunately, its just a bog standard potentiometer attached to the driver. It's pretty much as low as I can set it and I'll turn it up in small increments across the coming weeks! It's a quantum board 288, samsumg lm301h with uv + IR

  8. The Following 4 Users Say Thank You to L0wdawg For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), MrC (30-03-21)

  9. #5

    Join Date
    Jun 2020
    Posts
    128
    Thanks
    152
    Been Thanked: 564 Times

    Default

    Quote Originally Posted by MrCannab1sir View Post
    Good luck mate, subbed up. 3rd time lucky eh
    Cheers sir! Well it only seemed right to try again... I'll conquer it eventually

  10. The Following 4 Users Say Thank You to L0wdawg For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), MrC (30-03-21)

  11. #6

    Join Date
    Sep 2017
    Location
    Softwater, UK
    Posts
    9,267
    Thanks
    18,336
    Been Thanked: 52,286 Times

    Default

    Quote Originally Posted by L0wdawg View Post
    Thanks!

    I can't change the light according to wattage unfortunately, its just a bog standard potentiometer attached to the driver. It's pretty much as low as I can set it and I'll turn it up in small increments across the coming weeks! It's a quantum board 288, samsumg lm301h with uv + IR
    Perfect...and apologies: I didn't see it in the title before.

  12. The Following 4 Users Say Thank You to Herbitual For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), L0wdawg (30-03-21)

  13. #7

    Join Date
    Sep 2017
    Location
    Softwater, UK
    Posts
    9,267
    Thanks
    18,336
    Been Thanked: 52,286 Times

    Default

    L0w - if I may be so bold as to suggest something, it's that you have your work cut out with air pots and soil - I absolutely hated that combo. There's just no way of knowing if you've managed to moisten all of the soil to the bottom; it was seriously stunting my plants until I moved away from them. I'm sure you'll be fine and all that, but it's a consideration and JMO, as always.

  14. The Following 4 Users Say Thank You to Herbitual For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), L0wdawg (30-03-21)

  15. #8

    Join Date
    Jun 2020
    Posts
    128
    Thanks
    152
    Been Thanked: 564 Times

    Default

    Quote Originally Posted by Herbitual View Post
    L0w - if I may be so bold as to suggest something, it's that you have your work cut out with air pots and soil - I absolutely hated that combo. There's just no way of knowing if you've managed to moisten all of the soil to the bottom; it was seriously stunting my plants until I moved away from them. I'm sure you'll be fine and all that, but it's a consideration and JMO, as always.
    I've not tried it before! The first girl I did was a fabric pot and soil, the 2nd run air pots and coco... hopefully it won't be problematic! I can gauge the run off as there is a small gap between the air pots and the trays (they sit nicely on the inner ridges)

    Thanks for the pointer!!

  16. The Following 4 Users Say Thank You to L0wdawg For This Useful Post:

    Blue61 (30-03-21), Cannabug (30-03-21), GEORGE (30-03-21), Herbitual (30-03-21)

  17. #9

    Join Date
    Jun 2019
    Location
    Free Society
    Posts
    1,986
    Thanks
    18,831
    Been Thanked: 9,218 Times

    Default

    Good luck with the grow mate. Keeping my fingers crossed for you Low

  18. The Following 3 Users Say Thank You to Cannabug For This Useful Post:

    Blue61 (30-03-21), GEORGE (30-03-21), L0wdawg (30-03-21)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


THCtalk.com Disclaimer - You must be over 18 years old to view/use this site .THCtalk.com does not encourage growing Cannabis or possessing Cannabis. Learning how to grow Cannabis instructions should be for educational purposes only. All Information contained in this web site is for: Historical reference, Scientific reference and Educational purposes only. Visitors to this website are advised against breaking the law as It is illegal to smoke, grow, or possess cannabis in the UK and some US States