Hola everybody!
Today im making thc infused vape oil Had sucsess with it and was thinking if i share what i do maybe it can get even better! so here we go
Froze 3g grinded up bud in my freezer for some time and grinded it on a 150micron stainless steel screen. (does not have to be stainless) And why a 150 screen is because i only have a 150micron screen so its going to be some unpurity in the oil as you will see. I guess if you use a smaller micron screen like 70 ish you will only collect heads and not leaf waste and so on. Going to order 1 now that i think about it. lol
Anyway i ended opp with 350mg keif. Could proberbly collect more but as i sayd the unpurity will kick in.
Then take a dobbel boiler or like i do a normal kitchen pan or whatever you call it and make a boiler. Fill your pan halfway with water and make sure whatever you have over it will not touch the water as its boiling under there. I sacrefised my dogs meal bowl as the top part.
For 3g buds i use 10ml vape oil. 10ml is enough to fill my tank 5 times.
Filling my pan with water. Setting my dog bowl over it. Making sure its not touching the water. Then adding the oil and letting it heat for some minutes. Then i add the keif. Stirr it good and putting a aluminuim foil over. Cooking like this for 20 min.
Then i remove the foil and the dog bowl and let it cool off for a minute or 2 while sturring it. Meanwhile im adding water as most of it is gone.
Repeating this prosess for 3 hours ish. You can go as i have read from 2-6 hours. I guess longer too. I use 3 hours
When done repeating this prosess i let it cool off then use a syringe to take it up.
I then use a cup and cover it with cheesecloth. You can go up to sevral sheets of cloth to get a purer filtration. I use 1 sheet so a ruff filtration.
And thats it. Your cup will fill with ready to smoke oil. Use a syringe and put it in your vapor or storage container!
V8
Bookmarks