Hi,
I am new to this forum. I desperatly need help.
I have a 4 site home made RDWC.
100 GALLON capacity
1/8 hp cooler
2 Airstones in resivoir
4 Airstones in buckets (1 each)
1 water pump moving water through the cooler
1 water pump moving water through the system
600w mh turned down to 400
Lux is ok at canopy (20x10000)<=something like that
68 resivoir temp
PPM around 1000
Thermostat attached to fan that sucks air outdoors
GH Nutes (I used Lucas calculator)
I had tried using bennies (emerald goddess root wizard and/or voodoo)
The plants in the picture were in a 4 site DWC cloner and they were perfect. I cleaned my rdwc added fresh water, nutes etc.
After about 24 hours they got droopy and I could see particles on the roots. I added 30ml of h202. Then today, I checked them and they were not any better.
Another forum member sugested they might be overfed. So I took 5 gallons out and added 5 gallons of fresh water with 30ml of h202.
Last night I checked ppm and it was 1080...24 hours later it was pretty close...1050ish....
Thanks...
Any suggestions are appreciated
Sent from my SM-T560NU using Tapatalk
Bookmarks