Bit bored so got the idea to replace my current cupboard. Going for one a bit taller and a few cm less width.
I intend on squeezing in a vegging area, a flowering area, the fan, filter and x2 5 litre jerry cans with pumps for auto feeding. Flowering section will have a drain to outside so its just the vegging area ill keep an eye on... I'll use a deep runoff tray for that.
Will have the flowering area in the top half so its intake will be via a vent in the veg area above the lights. I only run autos so the lights not an issue. Hoping the veg lights help lower humidity as its not ideal to intake from the veg area, however I don't have the space to split the extraction ducting so the veg air will have to go via the flower room. Will be sucking air out from the flowering area and blowing it thru the filter which will be enclosed next to a vent to outside. Using rectangular ducting as its too tight for a 100mm duct running up the though the flowering area floor as the plant tray will cover most of the area. Should have just enough space in front of that stuff to put the watering jugs on shelves. Going to lower the base of the wardrobe to give an extra 12 or 13 cm.
Bookmarks